20×20 mm profiles
Four 20×20 mm profiles mount underneath the rig and form a base for the motion system. Available in black and silver. Maximum rig width: 620 mm.
In stock
Ships in 2–3 days
SIMRIG SR1
A complete 3-DOF motion system for lighter simulator setups, bringing acceleration, braking, cornering and track detail into the rig.
SIMRIG Control Center included. Rig and mounting solution not included.
€ 4 000.00
inc. VAT (25 %) · Sweden
Configure this system
Choose your rig and mounting solution. The configurator adds the parts required for your installation before checkout.
- Shipping is calculated at checkout for your country.
- 14-day returns · 3-year guarantee
- Delivered by UPS or DHL Express
Why SR1
SR1 brings the complete SIMRIG 3-DOF motion experience to lighter simulator setups. It translates simulator telemetry into movement you can feel through acceleration, braking, cornering, curbs and changes in the track surface.
With 70 mm travel, up to 100 mm/s speed and the same SIMRIG Control Center software as SR2 and SR3, SR1 provides the full motion range of the SIMRIG platform. The system is also notably quiet in operation.
Choose SR1 for lighter simulator setups built around compatible aluminium profile rigs up to 40×80 mm, where you want the complete SIMRIG motion experience without needing the additional responsiveness and finer detail offered by SR2 and SR3.
SR1 shares the same 70 mm travel and up to 100 mm/s maximum speed as SR2 and SR3. Moving up to SR2 and SR3 adds greater responsiveness and finer control of smaller movements, while SR1 retains the same core 3-DOF motion range.
Technical specifications
| Motion | 3-DOF — heave, pitch and roll |
| Maximum moving load | 175 kg |
| Travel | 70 mm |
| Maximum speed | 100 mm/s at maximum load |
| Positioning accuracy | 0.1 mm |
| System latency | 7 ms |
| Connectivity | USB-C |
| Power supply | 500 W, 100–240 V, 50–60 Hz |
| Package dimensions | 79 × 59 × 22 cm |
| Package weight | 22 kg |
What's in the box
- 4x SIMRIG SR1 Linear Actuator
- 1x SIMRIG SR1 ECU
- 1x 500W Power Supply (100-240 V at 50-60 Hz)
- 1x Emergency Stop
- 4x Linear Actuator Cable (1m)
- 1x Power Cable for ECU (2m)
- 1x Power Cable (C13)
- 1x USB Cable (3m)
- 1x SIMRIG Control Center (download)
- Assorted screws and T-nuts
Rig compatibility & mounting
SR1 is intended for lighter simulator setups and is recommended for aluminium profile rigs up to 40×80 mm. EasyBracket provides direct mounting for compatible 40×80 mm aluminium profiles. For compatible rigs up to 620 mm wide, a 20×20 mm under-rig mounting solution is also available.
EasyBracket
Four CNC-machined aluminium brackets mount the motion system directly to the rig. Suitable for 40×80 mm aluminium profiles and larger, with no maximum rig width.
SIMRIG Control Center included
SIMRIG Control Center reads telemetry from supported simulators, automatically detects the simulator and vehicle you are driving, loads the matching profile, and converts telemetry into motion in real time with no perceptible delay. Native OpenVR and OpenXR motion compensation is included.
Supported simulators
More than 60 supported titles across racing, rally, driving and flight simulation. Platform support varies by title.
Assetto Corsa
Assetto Corsa Competizione
Assetto Corsa EVO
Automobilista 2
BeamNG.drive
DiRT Rally 2.0
EA SPORTS WRC
Euro Truck Simulator 2
F1 25
Forza Horizon 5
Forza Motorsport 7
Gran Turismo 7
iRacing
Le Mans Ultimate
Microsoft Flight Simulator 2024
Project CARS 2
Project Motor Racing
RaceRoom Racing Experience
rFactor 2
Richard Burns Rally
Wreckfest 2
X-Plane 11 & 12
+ 41 more
Tested and assembled in Sweden
Every SIMRIG motion system is assembled, tested and checked in our factory outside Gothenburg, Sweden, before it leaves us.
There are over 1200 SIMRIG motion systems around the world. Some have worked, and keep working, for well over five years under heavy use. Quality and user experience are top of mind at SIMRIG. We want our products to serve you today and tomorrow.
All motion systems come with a three-year guarantee, but we offer repair options well beyond that timeline.
Reviews
Hear it from people who drive it.
English
Sim Racing Garage
In-depth review by Barry Rowland at Sim Racing Garage.
Swedish
Gamereactor
Video review by Gamereactor in Swedish, English subtitles.
German
RON Reviewt
Part one of a two-part SR1 review in German, English subtitles.
German
RON Reviewt
Part two of a two-part SR1 review in German, English subtitles.
Which one — SR1, SR2 or SR3?
Start by checking which systems can support the total moving weight of your simulator. If more than one system is compatible, choose based on the level of motion performance you want. SR2 and SR3 provide greater responsiveness and finer detail than SR1, while SR3 delivers the highest overall performance.
SR1
SR1 provides the complete SIMRIG 3-DOF motion experience and is a good choice for lighter simulator setups where maximum performance is not the primary requirement.
SR2
SR2 adds greater precision, responsiveness and detail. It is a strong all-round choice for sim racers looking for higher motion performance without stepping up to SR3.
SR3
SR3 delivers the best SIMRIG motion experience, with the highest responsiveness and the finest detail. Choose SR3 when maximum motion performance is the priority — not only when additional load capacity is required.
Maximum moving load is 175 kg for SR1, 225 kg for SR2 and 250 kg for SR3, including the driver, rig and all equipment that moves with the motion system.
Good to know
Noise
The sound level is very low. A large rubber pad under each actuator keeps the system stationary and absorbs vibrations. The power supply is fan-less, and the ECU fan only runs when necessary.
Power supply
Operates around the world: 100–240 V at 50/60 Hz. A C13 power cable for your region is included.
Ships from Sweden
All SIMRIG products are made in Sweden with parts from around Europe, and sometimes the world. When you buy from us, we ship directly from Sweden to your house.
Ships to your door
A packaged motion system weighs around 20 kg. This is too heavy for your local postal distribution center. Instead, we ship the package to your door. Use the app from DHL Express or UPS to schedule a time that fits.
Feel free to contact us if you have more questions. Ask us
Frequently asked questions
Is a rig included?
No. The motion system mounts on the rig you already have, one actuator in each corner. Most aluminium profile rigs and selected tubular rigs fit; the compatibility list in the documentation names the profiles and the brackets for them.
Which simulators are supported?
More than 60 titles across racing, rally, driving and flight simulation: iRacing, Assetto Corsa, Automobilista 2, rFactor 2, the F1 and WRC games, and many more. Platform support varies by title, with compatible PC, PlayStation and Xbox games supported. The complete list lives in the documentation and grows with every release.
Does it work in VR?
Yes. SIMRIG Control Center includes native motion compensation for OpenVR and OpenXR. It compensates for the physical movement of the rig, helping keep the virtual viewpoint stable while the simulator moves.
What is the difference between the SR1, SR2 and SR3?
All three provide full 3-DOF motion with 70 mm travel and up to 100 mm/s speed, and all three use SIMRIG Control Center. Moving from SR1 to SR2 and SR3 adds responsiveness and finer detail, with SR3 delivering the highest level of motion performance. The maximum moving load — 175, 225 and 250 kg — decides which systems fit your setup.
Is the software included?
Yes. SIMRIG Control Center comes with every motion system at no extra cost. A serial number, printed on the ECU box, is all you need to download it.
Something we did not answer? Ask us